Font Size:
Site Colors:
Accesskey
S - Skip navigation
1 - Home page
4 - Search
Accessibility Statement
WelcomeName
Find Product by: Type Featuers
Long Full Category Name
Long Full Category Name
Long Full Category Name
Long Full Category Name
Camera Type Area (90)
Resolution [MPixel]
Sensor_Manufacturer
Resolution [MPixel]
Sensor_Manufacturer
Resolution [MPixel]
Sensor_Manufacturer

LED Lighting controllers

1Vision offers a variety of  LED lighting controllers. Available in either 1, 2, 4, 8 or 16 channel modules, these lighting controllers allow the user to precisely drive a LED light module on each channel. The controller range offers precise current control to ensure stable and repeatable illumination.

Each channel is controlled independently, providing either continuous output or strobing the light with timing control down to 1µS on selected models so fast moving objects can be ‘frozen’ when imaged. The LEDs can be overdriven and they are safely protected while optimizing the amount of light produced. Control is achieved using a push button interface on the controller with simple menu driven options or the controllers also have the option of RS232 or Ethernet communication, allowing remote control and easy integration into automated solutions. The new generation  of controllers embrace the new SafePower® allowing much easier integration as any light can be driven and overdriven from a conventional 24vdc power supply. 

Click here to identify which controller is best suited to your application .

Let us help you find the controller that best suits your needs!

Find the controller that is best for you

Using our advanced search engine you can define the following characteristics to locate the controller most suited to your needs

LED Lighting controllers Products
Makat Image Description Friendly URL(ENG) MANUFACTURER CATEGORY SUB CATEGORY Datasheet USER MANUAL Temp. Range Number of Channels Environmental Max Current Continuous Max Current Pulsed INTERFACING Minimum Pulse Width (μS) SafeSense SafePower
RT200-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT220 / RT260 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT200-20 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 20A P-Button 20 Yes Yes
RT200F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT220 / RT260 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT200F-20 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 20A P-Button 1 Yes Yes
RT220-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT220 / RT260 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT220-20 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 20A Ethernet 20 Yes Yes
RT220F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT220 / RT260 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT220F-20 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 20A Ethernet 1 Yes Yes
RT260-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT220 / RT260 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT260-20 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 20A RS232 20 Yes Yes
RT260F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT220 / RT260 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT200 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT200 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT200 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT260F-20 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 20A RS232 1 Yes Yes
RT420-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse /strobe controllers are current sources, with the RT400 controller range offering four output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT420 / RT460 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT400 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT400 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT400 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT420-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 4A 20A Ethernet 20 Yes Yes
RT420F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse /strobe controllers are current sources, with the RT400 controller range offering four output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT420 / RT460 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT400 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT400 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT400 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT420F-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 4A 20A Ethernet 1 Yes Yes
RT460-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse /strobe controllers are current sources, with the RT400 controller range offering four output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT420 / RT460 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT400 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT400 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT400 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT460-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 4A 20A RS232 20 Yes Yes
RT460F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse /strobe controllers are current sources, with the RT400 controller range offering four output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT420 / RT460 models can be quickly configured using our free software, or for the Ethernet enabled RT220 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT400 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT400 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT400 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT460F-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 4A 20A RS232 1 Yes Yes
RT820F-2 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT800 controller range offering eight output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. These controllers allow pulse width control down to 1 µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT820 / RT860 models can be quickly configured using our free software, or for the Ethernet enabled RT820 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT800 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT800 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage, making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT820F-2 Gardasoft Illumination LED Lighting controllers; Download Download 8 4A 2A Ethernet 1 Yes Yes
RT820F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT800 controller range offering eight output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. These controllers allow pulse width control down to 1 µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT820 / RT860 models can be quickly configured using our free software, or for the Ethernet enabled RT820 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT800 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT800 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage, making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT820F-20 Gardasoft Illumination LED Lighting controllers; Download Download 8 4A 20A Ethernet 1 Yes Yes
RT860F-2 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT800 controller range offering eight output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. These controllers allow pulse width control down to 1 µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT820 / RT860 models can be quickly configured using our free software, or for the Ethernet enabled RT820 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT800 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT800 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage, making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT860F-2 Gardasoft Illumination LED Lighting controllers; Download Download 8 4A 2A RS232 1 Yes Yes
RT860F-20 The RT range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT800 controller range offering eight output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. These controllers allow pulse width control down to 1 µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The RT820 / RT860 models can be quickly configured using our free software, or for the Ethernet enabled RT820 range, simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the RT800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RT800 range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RT800 series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage, making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RT860F-20 Gardasoft Illumination LED Lighting controllers; Download Download 8 4A 20A RS232 1 Yes Yes
RTCC420-2 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC420-2 Gardasoft Illumination LED Lighting controllers; Download Download 4 2A 2A Ethernet 20 Yes Yes
RTCC420F-2 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC420F-2 Gardasoft Illumination LED Lighting controllers; Download Download 4 2A 2A Ethernet 1 Yes Yes
RTCC460-2 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC460-2 Gardasoft Illumination LED Lighting controllers; Download Download 4 2A 2A RS232 20 Yes Yes
RTCC460F-2 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC460F-2 Gardasoft Illumination LED Lighting controllers; Download Download 4 2A 2A RS232 1 Yes Yes
RTCC420-20 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC420-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 3A 20A Ethernet 20 Yes Yes
RTCC420F-20 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC420F-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 3A 20A Ethernet 1 Yes Yes
RTCC460-20 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC460-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 3A 20A RS232 20 Yes Yes
RTCC460F-20 The RTCC4 combines the features of the Gardasoft RT Series LED Lighting Controllers with the addition of two digital outputs for Triggering or general use. This combination provides a high level of integration in Machine Vision systems - reducing complexity, space and cost. Some applications have fixed speed mechanisms and the time from the trigger to the reject gate is well known; for others, an encoder may be used to determine belt movement. Two types of encoder input are supported - one wire systems which have distance only, and two wire systems having distance and belt direction only. Taking the functionality of the Gardasoft RTCC4 Timing Controller and integrating this into the RT Series controllers enables precise lighting control combined with the ability to trigger external components such as cameras and reject gates. In addition, inputs can be accepted from encoders or proximity switches that can then be used to trigger the lights or one of the additional digital inputs. RTCC460F-20 Gardasoft Illumination LED Lighting controllers; Download Download 4 3A 20A RS232 1 Yes Yes
RC100 The RC range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the needs of perhaps having to use a bespoke DC power supply or heat sinking the controller. All RC models also include our SafeSense™ technology. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft RC Series controllers are therefore single channel current source devices. The RC Series models can be quickly configured using our free software, or for the Ethernet enabled RC120 controller, simply by accessing the controller via your internet browser; type the IP address for the controller into your browser and you have full access to all of the parameters. Using a third party software package? Not a problem, the RC range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RC range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RC Series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage, making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RC100 Gardasoft Illumination LED Lighting controllers; Download Download 1 1A 1A P-Button 100 Yes Yes
RC120 The RC range is Gardasoft's latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the needs of perhaps having to use a bespoke DC power supply or heat sinking the controller. All RC models also include our SafeSense™ technology. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft RC Series controllers are therefore single channel current source devices. The RC Series models can be quickly configured using our free software, or for the Ethernet enabled RC120 controller, simply by accessing the controller via your internet browser; type the IP address for the controller into your browser and you have full access to all of the parameters. Using a third party software package? Not a problem, the RC range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the RC range allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. The RC Series will protect the lights ensuring that the high current pulses are regulated in terms of pulse width timing and frequency. The end result is you get the maximum light possible for your application. SafePower™ now allows you to overdrive the lights without having to increase the input power supply voltage, making implementation and system integration much simpler. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. RC120 Gardasoft Illumination LED Lighting controllers; Download Download 1 1.2A 2A Ethernet 100 Yes Yes
PP420 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources. The PP420 LED lighting controller offers four output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP420 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP420 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the PP420 controller allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. SafeSense™ regulates the pulse width timing and duty cycle, depending on how high you are overdriving the light. The end result is you get the maximum light possible for your application. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. If you're overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT400 series controller, which has all of the features of the PP420 controller but is based around our SafePower™ technology. PP420 Gardasoft Illumination LED Lighting controllers; Download Download 4 2A 10A Ethernet 20 Yes Yes
PP420F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources. The PP420 LED lighting controller offers four output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP420 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP420 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSense™ technology, the PP420 controller allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. SafeSense™ regulates the pulse width timing and duty cycle, depending on how high you are overdriving the light. The end result is you get the maximum light possible for your application. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. If you're overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT400 series controller, which has all of the features of the PP420 controller but is based around our SafePower™ technology. PP420F Gardasoft Illumination LED Lighting controllers; Download Download 4 2A 10A Ethernet 1 Yes Yes
PP500 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP500 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP520 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP520 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSeries™ technology, the PP500 controller allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. SafeSense™ regulates the pulse width timing and duty cycle, depending on how high you are overdriving the light. The end result is you get the maximum light possible for your application. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. If you're overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller, which has all of the features of the PP500 controller but is based around our SafePower™ technology. PP500 Gardasoft Illumination LED Lighting controllers; Download Download 2 2A 10A P-Button 20 Yes Yes
PP520 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP500 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP520 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP520 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSeries™ technology, the PP500 controller allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. SafeSense™ regulates the pulse width timing and duty cycle, depending on how high you are overdriving the light. The end result is you get the maximum light possible for your application. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. If you're overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller, which has all of the features of the PP500 controller but is based around our SafePower™ technology. PP520 Gardasoft Illumination LED Lighting controllers; Download Download 2 2A 10A Ethernet 20 Yes Yes
PP500F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP500 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP520 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP520 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSeries™ technology, the PP500 controller allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. SafeSense™ regulates the pulse width timing and duty cycle, depending on how high you are overdriving the light. The end result is you get the maximum light possible for your application. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. If you're overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller, which has all of the features of the PP500 controller but is based around our SafePower™ technology. PP500F Gardasoft Illumination LED Lighting controllers; Download Download 2 2A 10A P-Button 1 Yes Yes
PP520F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP500 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 1µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP520 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP520 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Using our patented SafeSeries™ technology, the PP500 controller allows you to overdrive your LED lights safe in the knowledge that the lights will be protected from damage. SafeSense™ regulates the pulse width timing and duty cycle, depending on how high you are overdriving the light. The end result is you get the maximum light possible for your application. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. If you're overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller, which has all of the features of the PP500 controller but is based around our SafePower™ technology. PP520F Gardasoft Illumination LED Lighting controllers; Download Download 2 2A 10A Ethernet 1 Yes Yes
PP600 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP600 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A P-Button 20 Yes Yes
PP602 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP602 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A P-Button 20 Yes Yes
PP610 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP610 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A RS232 20 Yes Yes
PP612 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP612 Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A RS232 20 Yes Yes
PP600F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP600F Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A P-Button 5 Yes Yes
PP602F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP602F Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A P-Button 5 Yes Yes
PP610F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP610F Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A RS232 5 Yes Yes
PP612F To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP600 LED lighting controller offers two output channels which are independently controlled. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The 'F' version controller will allow pulse width control down to 5µS resolution. Selected mode allows switching of the light based upon the state of an external trigger. The PP600 also has an additional mode of operation called switched mode. This enables you to very quickly change your light from one intensity setting to another simply by changing the states of the two trigger inputs (high or low). The end result is you can preset up to four different light intensity values and quickly switch from one setting to the next just by changing the states of the trigger inputs. The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT200 series controller (RT260 for RS232 control), which has all of the features of the PP600 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP600 range. PP612F Gardasoft Illumination LED Lighting controllers; Download Download 2 4A 10A RS232 5 Yes Yes
PP820 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP820 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 20A Ethernet 1 No No
PP821 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP821 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 20A Ethernet 1 No No
PP822 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP822 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 2A Ethernet 1 No No
PP820C To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP820C Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 2A Ethernet 1 No No
PP821C To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP821C Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 5A Ethernet 1 No No
PP822C To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP822C Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 5A Ethernet 1 No No
PP860 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP860 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 20A RS232 1 No No
PP861 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP861 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 20A RS232 1 No No
PP862 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP862 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 2A RS232 1 No No
PP860C To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP860C Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 2A RS232 1 No No
PP861C To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP861C Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 5A RS232 1 No No
PP862C To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP800 series LED lighting controller offers eight output channels which are independently controlled. You have two options regarding communication; RS232 (PP860 range) or Ethernet (PP820 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to either 2A or 5A. The lower maximum pulse current gives you much finer resolution control over the output current. There are also other optional controllers within the range (suffixed with a C) that give even greater control resolution on the output. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. Selected mode allows switching of the light based upon the state of an external trigger. The PP800 models can be quickly configured using our free software, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS. When overdriving you may need to increase the DC power input to the controller or heat-sink the controller due to power dissipation. If this is an issue for your application we would recommend the RT800 series controller, which has all of the features of the PP800 series but is based around our SafePower™ technology. The RT series will also offer you all the advantages of our patented SafeSense™ technology which is not available in the PP800 range. PP862C Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 5A RS232 1 No No
PP1620 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP1600 series LED lighting controller offers 16 output channels which are independently controlled. You have two options regarding communication; RS232 (PP1660 range) or Ethernet (PP1620 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to 2A. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The PP1600 models can be quickly configured using our free software, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. PP1620 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 20A Ethernet 1 No No
PP1621 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP1600 series LED lighting controller offers 16 output channels which are independently controlled. You have two options regarding communication; RS232 (PP1660 range) or Ethernet (PP1620 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to 2A. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The PP1600 models can be quickly configured using our free software, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. PP1621 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 2A Ethernet 1 No No
PP1660 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP1600 series LED lighting controller offers 16 output channels which are independently controlled. You have two options regarding communication; RS232 (PP1660 range) or Ethernet (PP1620 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to 2A. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The PP1600 models can be quickly configured using our free software, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. PP1660 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 20A RS232 1 No No
PP1661 To get the very best out of your LED lighting solution, in terms of brightness stability and control, the lights should be driven from a current source, not a nominal voltage supply. The Gardasoft controllers are current sources. The PP1600 series LED lighting controller offers 16 output channels which are independently controlled. You have two options regarding communication; RS232 (PP1660 range) or Ethernet (PP1620 range). The standard versions offer a maximum pulse current of 20A. There are other options which reduce the maximum pulse current to 2A. Each channel can be individually configured to output continuously; or pulsed based on an external trigger signal or internal timer. The PP1600 models can be quickly configured using our free software, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS and others. PP1661 Gardasoft Illumination LED Lighting controllers; Download Download 8 2A 2A RS232 1 No No
PPCC1620 The PPCC16 combines the features of the Gardasoft PP1600 series LED Lighting Controllers with the addition of 8 digital outputs for triggering cameras or general use. With new generation LEDs the PPCC16 series can provide high intensity pulses which exceed the brightness of xenon strobes. The PPCC1620 Ethernet version acts as a miniature web server and can be controlled by image processing software on a remote PC. All versions of the PPCC16 can be remotely controlled and dynamically configured using commands sent from an image processing application on a remote PC. Options for configuration include RS232 and Ethernet. With the Ethernet options a web browser can be used to access the PP Controllers' internal web pages allowing status to be viewed and parameters to be changed. Three modes of operation are provided separately for each channel: Continuous: Output is a continuous level Pulsed: Output is pulsed once per trigger Switched: Output is switched by a digital output PPCC1620 Gardasoft Illumination LED Lighting controllers; Download 20A 16 2A Ethernet 1 No No
PPCC1621 The PPCC16 combines the features of the Gardasoft PP1600 series LED Lighting Controllers with the addition of 8 digital outputs for triggering cameras or general use. With new generation LEDs the PPCC16 series can provide high intensity pulses which exceed the brightness of xenon strobes. The PPCC1620 Ethernet version acts as a miniature web server and can be controlled by image processing software on a remote PC. All versions of the PPCC16 can be remotely controlled and dynamically configured using commands sent from an image processing application on a remote PC. Options for configuration include RS232 and Ethernet. With the Ethernet options a web browser can be used to access the PP Controllers' internal web pages allowing status to be viewed and parameters to be changed. Three modes of operation are provided separately for each channel: Continuous: Output is a continuous level Pulsed: Output is pulsed once per trigger Switched: Output is switched by a digital output PPCC1621 Gardasoft Illumination LED Lighting controllers; Download 2A 16 2A Ethernet 1 No No
PPCC1660 The PPCC16 combines the features of the Gardasoft PP1600 series LED Lighting Controllers with the addition of 8 digital outputs for triggering cameras or general use. With new generation LEDs the PPCC16 series can provide high intensity pulses which exceed the brightness of xenon strobes. The PPCC1620 Ethernet version acts as a miniature web server and can be controlled by image processing software on a remote PC. All versions of the PPCC16 can be remotely controlled and dynamically configured using commands sent from an image processing application on a remote PC. Options for configuration include RS232 and Ethernet. With the Ethernet options a web browser can be used to access the PP Controllers' internal web pages allowing status to be viewed and parameters to be changed. Three modes of operation are provided separately for each channel: Continuous: Output is a continuous level Pulsed: Output is pulsed once per trigger Switched: Output is switched by a digital output PPCC1660 Gardasoft Illumination LED Lighting controllers; Download 20A 16 2A RS232 1 No No
PPCC1661 The PPCC16 combines the features of the Gardasoft PP1600 series LED Lighting Controllers with the addition of 8 digital outputs for triggering cameras or general use. With new generation LEDs the PPCC16 series can provide high intensity pulses which exceed the brightness of xenon strobes. The PPCC1620 Ethernet version acts as a miniature web server and can be controlled by image processing software on a remote PC. All versions of the PPCC16 can be remotely controlled and dynamically configured using commands sent from an image processing application on a remote PC. Options for configuration include RS232 and Ethernet. With the Ethernet options a web browser can be used to access the PP Controllers' internal web pages allowing status to be viewed and parameters to be changed. Three modes of operation are provided separately for each channel: Continuous: Output is a continuous level Pulsed: Output is pulsed once per trigger Switched: Output is switched by a digital output PPCC1661 Gardasoft Illumination LED Lighting controllers; Download 2A 16 2A RS232 1 No No
ULC-2 ULC-2 Metaphase Illumination LED Lighting controllers; Download 2 4A 40A Ethernet 2
TR-HT220 The Gardasoft TR-HT series are industry’s highest power controllers for Machine Vision LED lighting; at 150W per channel, they are the perfect partner for driving high power LED Area and LED Bar lights. The Gardasoft TR-HT series provide the highest drive power for machine vision LED lighting. With unique switching technology, these controllers have 2 independent output channels, each rated at 150W and each capable of driving 50A in pulsed mode and 5A in continuous mode. Dual range output current with the design of the TR-HT controllers enables fine tuning at low currents – with resolution from 0.6mA to 15mA. SafePowerTM removes the restriction of the output voltage needing to be less than the input voltage, and automatically steps up or down the voltage needed to drive or overdrive the lighting, up to a limit of 48V. SafePower works automatically without needing any configuration or user input. For example, the TR-HT range can use a 24VDC supply, regardless of the lighting connected. In addition, PP mode allows the advantages of SafePower with the advantages of a direct current drive (as on the PP range of controllers). The output voltage to the lighting can be higher than the supply voltage, but without the limitations on pulse frequency that the RT controllers have. Four modes of operation are provided separately for each channel of the TR-HT controllers enabling flexible operation: Continuous: Output is a continuous level Pulse: Output is pulsed once per trigger Switched: Output is switched by a digital input Selected: Output intensity selected by a digital input Patented SafeSenseTM technology creates a safe working environment for overdriving LED lights. Driving LEDs with a constant current source allows very precise overdriving. SafeSense ensures that the pulse width and duty cycle are kept within safe working limits. The end result is that much more light is gained from the LED lighting for your machine vision application. This is in addition to the Triniti functionality which comes as standard with all TR-HT controllers and is applicable to Triniti-enabled lighting from manufacturers such as CCS, Smart Vision Lights, TPL and Metaphase. All TR-HT controllers have two built-in digital inputs for trigger control, and four digital output points with the ability to trigger external components such as cameras and reject gates. TR-HT220 Gardasoft Illumination LED Lighting controllers; Download 5° to 50°C 2 5A 50A Ethernet 20 Yes Yes
TR-HT260 The Gardasoft TR-HT series are industry’s highest power controllers for Machine Vision LED lighting; at 150W per channel, they are the perfect partner for driving high power LED Area and LED Bar lights. The Gardasoft TR-HT series provide the highest drive power for machine vision LED lighting. With unique switching technology, these controllers have 2 independent output channels, each rated at 150W and each capable of driving 50A in pulsed mode and 5A in continuous mode. Dual range output current with the design of the TR-HT controllers enables fine tuning at low currents – with resolution from 0.6mA to 15mA. SafePowerTM removes the restriction of the output voltage needing to be less than the input voltage, and automatically steps up or down the voltage needed to drive or overdrive the lighting, up to a limit of 48V. SafePower works automatically without needing any configuration or user input. For example, the TR-HT range can use a 24VDC supply, regardless of the lighting connected. In addition, PP mode allows the advantages of SafePower with the advantages of a direct current drive (as on the PP range of controllers). The output voltage to the lighting can be higher than the supply voltage, but without the limitations on pulse frequency that the RT controllers have. Four modes of operation are provided separately for each channel of the TR-HT controllers enabling flexible operation: Continuous: Output is a continuous level Pulse: Output is pulsed once per trigger Switched: Output is switched by a digital input Selected: Output intensity selected by a digital input Patented SafeSenseTM technology creates a safe working environment for overdriving LED lights. Driving LEDs with a constant current source allows very precise overdriving. SafeSense ensures that the pulse width and duty cycle are kept within safe working limits. The end result is that much more light is gained from the LED lighting for your machine vision application. This is in addition to the Triniti functionality which comes as standard with all TR-HT controllers and is applicable to Triniti-enabled lighting from manufacturers such as CCS, Smart Vision Lights, TPL and Metaphase. All TR-HT controllers have two built-in digital inputs for trigger control, and four digital output points with the ability to trigger external components such as cameras and reject gates. TR-HT260 Gardasoft Illumination LED Lighting controllers; Download 5° to 50°C 2 5A 50A RS232 20 Yes Yes